The valve provides easy on/off water flow.The HYDROS DC Solenoid Valve is a Drive Port accessory for HYDROS Control 2 and Control 4.
HYDROS DC Solenoid Water Valve
$24.99
Description
The HYDROS DC Solenoid Valve works in conjunction with a HYDROS controller.When the sensor detects the water level is low, the valve opens to allow fresh source water to flow through and top-off your tank or sump.When the sensor senses that the water level is replenished, the controller will shut off power to the solenoid, stopping the in-flow of water.The HYDROS DC Solenoid Valve should be connected to the product line coming off your source water inlet.It has 1/4″ push-connect fittings to insert into standard tubing quickly and easily.
Just plug it into a Drive Port on the Control 2 or Control 4 for power and control and configure the settings in the HYDROS app.It is recommended to install an auto-shutoff valve and check valve on your source water to prevent it from producing wastewater when the solenoid is closed.
HYDROS DC Solenoid Valve Specs:
Max Pressure:120 PSI
The HYDROS DC Solenoid Valve uses a GX12 aviation-style connector so the Control 2 and Control 4 maintain their IP65-rating (dust-tight and protected from water spray at any angle).
Powered and controlled by plugging into aDrive Port on the HYDROS Control 2 or Control 4.No additional power cord is required.
Resources are being developed from this product.Please contact us for more information.
