Calibration is an important step in keeping your equipment functioning properly.We recommend using at least two points of calibration on a monthly basis to allow the sensors to provide the most accurate reading possible.Using 4.01 and 7.01 single use packets achieves this calibration process.It is helpful to order enough packets to get through 6 months of calibration.Calibration packets can be stored in a cool dry area for up to 1 year.
HYDROS Calibration Solutions
$3.25
Description
To calibrate your Hydros
1.Remove the probe element from the water
2.Clean off any algae and bioslime using a soft cloth
3.Rinse with clean, fresh water
4.Open the 4.01 solution and insert the probe into the packet
5.Wait until the pH displays 4.01 on the Hydros App
6.Once that is completed remove from packet, rinse with clean fresh water
7.Open the 7.01 solution and insert the probe into the packet
8.Wait until the pH displays 7.01 on the Hydros App
9.Return the probe into the reservoir being monitored
10.Discard the packets in a trash can.
Resources are being developed from this product.Please contact us for more information.
